This manual describes how to use the Bever App with the LeafCarrier and how to change the settings.

The Bever app is available for iOS, macOS, Android or Windows. Download the Bever app from the Apple App StoreGoogle Play Store or Microsoft Store.

Before you start, make sure that you have created an account and assigned the license to use the Bever app.


In this manual: 

Login in to the bever app. 

Authorizing a Leaf Carrier 

Adding a Leaf Carrier to a network

Configuring a leaf carrier 


Login in to the bever app

Fist login into the Bever App

Once logged in, the app will start immediate search for LeafCarriers. 


Authorizing the Leaf Carrier

To authorize a leaf carrier, tap on the Leaf Carrier button, or if you want to authorize all devices in the ‘uncoupled’ list, tap the ‘authorize’ button.


More detailed information could be found in the Authorising Smart devices using the Bever App article.

 

Adding a Leaf Carrier to a network

To add a device to a network, tap on the device button, and click on ‘Create new network’


Click on next and apply to add the device to a network, or if wanted, change the network to another id.

After the network is saved on the device, the network page will open and show the Leaf Carrier button.

  

More detailed information could be found in the Using the Bever App article.


Configuring a leaf carrier 

Open the network in which the leaf carrier is in and tap on the device button to open the settings of the leaf carrier.

Tap on "refresh" and wait until all data is loaded.



Controlling multiple Leaf Carriers at the same time


First, make sure all the leaf carriers you want to control are authorized. Then, select and hold the Leaf Carrier button. Now you can select all the leaf carriers you want to control. When selected, click on the top right icon the gear symbol. Now you can setup the Leaf Carrier as explained in the next chapter, but the settings will be applied to all the leaf carriers you have selected.





Setting the whole carrier to a fixed percentage

In order to set the whole carrier to a percentage, tap and scroll on the percentage indicator until it reaches the wanted value. The ‘save’ button will appear in the top toolbar. If pressed, the value is stored on the leaf carrier.