In this manual: 


1.     Login in to the bever app. 

2.     Authorizing a Leaf Carrier 

3.     Adding a Leaf Carrier to a network

4.     Configuring a leaf carrier 


1. Login in to the bever app

In order to use the Bever app, you should already have an Bever account.


Sign into the Bever app:

Figure 1. The login screen

  1. Figure 2. The screen when no other networks are found, but uncoupled devices are found.


  2. Authorizing the Leaf Carrier

To authorize a leaf carrier, tap on the Leaf Carrier button, or if you want to authorize all devices in the ‘uncoupled’ list, tap the ‘authorize’ button.


Not authorized

If a device status is ‘NOT AUTHORIZED’, it means that the app did not receive a response from the Leaf Carrier. This happens if the user didn’t send any request to authorize yet, or the connection is lost while authorizing.


Other device authorized

Figure 3. A device authorizing.


To authorize you need to reset the leaf carrier by turning it off and on again.

To retry authorization, you can tap the device button or the ‘authorize’ button.


Reset needed

In case the button shows the status reset needed, the device needs to be reset in order to be authorized. A popup will also be shown which explains how the device can be authorized.

 

Figure 4. The reset explanation dialog


After the device is authorized, it can be added to a network. 

 

3. Adding a Leaf Carrier to a network


To add a device to a network, tap on the device button, and click on ‘Create new network’

Figure 5. Leaf carrier is selected

Figure 6. Network dialog

Click on next and apply to add the device to a network, or if wanted, change the network to another id.

After the network is saved on the device, the network page will open and show the Leaf Carrier button.

  

  1. Figure 7. Network overview

    4. Configuring a leaf carrier 

Open the network in which the leaf carrier is in and tap on the device button to open the settings of the leaf carrier.

Tap on "refresh" and wait until all data is loaded.


Figure 8. Download device information button


Controlling multiple Leaf Carriers at the same time


First, make sure all the leaf carriers you want to control are authorized. Then, select and hold the Leaf Carrier button. Now you can select all the leaf carriers you want to control. When selected, click on the top right icon the gear symbol. Now you can setup the Leaf Carrier as explained in the next chapter, but the settings will be applied to all the leaf carriers you have selected.




Setting the whole carrier to a fixed percentage

In order to set the whole carrier to a percentage, tap and scroll on the percentage indicator until it reaches the wanted value. The ‘save’ button will appear in the top toolbar. If pressed, the value is stored on the leaf carrier.



Tel +31(0)111 74 54 00

support@beverinnovations.com